SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q)
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) introduction
G-X 2 NiCrMoCuN 25 20, for components of pumps and apparatuses for the viscose producing industry, service temperatures up to 350 °C
Equivalent material: DIN 1.4531, EN 1.4531
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 7.9 g/cm³ |
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 100.0 °C | Coefficient of thermal expansion of 1.65E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.75E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.75E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.85E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.85E-5 1/K | - |
| Max service temperature, long | - | Max service temperature, long of 0 - 350 °C | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | 20.0 °C | Specific heat capacity of 500 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 15 W/(m·K) | - |
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.03 % |
| Chromium | Chromium of 19 - 21 % |
| Copper | Copper of 1.5 - 2 % |
| Manganese | Manganese of 1 % |
| Molybdenum | Molybdenum of 2.5 - 3.5 % |
| Nickel | Nickel of 24 - 26 % |
| Nitrogen | Nitrogen of 0.1 - 0.2 % |
| Phosphorus | Phosphorus of 0.04 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.02 % |
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Electrical resistivity | 23.0 °C | Electrical resistivity of 8.5E-7 Ω·m | Typical for Austenitic Stainless Steel |
SEW 410 Grade G-X2NiCrMoCuN25-20 quenched (+Q) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 23.0 °C | Elastic modulus of 195 GPa | Typical for Austenitic Stainless Steel |
| Elongation | 20.0 °C | Elongation of 20 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Tensile strength | 20.0 °C | Tensile strength of 440 - 640 MPa | - |
| Yield strength Rp0.2 | 20.0 °C | Yield strength Rp0.2 of 200 MPa | - |
| - | 100.0 °C | Yield strength Rp0.2 of 150 MPa | - |
| - | 200.0 °C | Yield strength Rp0.2 of 120 MPa | - |
| - | 300.0 °C | Yield strength Rp0.2 of 110 MPa | - |
| - | 350.0 °C | Yield strength Rp0.2 of 105 MPa | - |
| - | 400.0 °C | Yield strength Rp0.2 of 100 MPa | - |
| Yield strength Rp1.0 | 20.0 °C | Yield strength Rp1.0 of 225 MPa | - |
Join our long list of satisfied customers who trust our legacy of delivering quality steel.
-- Our promise
Get a quote