SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q)
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) introduction
Properties:
- more with Mo alloyed as 1.4539
- possesses a very high resistance to intergranular corrosion, pitting corrosion and crack corrosion
- it has the highest effect sum (Pittingindex) of the steel with 46
Application:
- in highly chloride containing media, e.g. in appropriate sulfur and phosphoric acid
- in plants of the offshore technology
Equivalent material: EN X1NiCrMoCuN25-20-7, DIN 1.4529, DIN X1NiCrMoCuN25-20-7, AFNOR Z2NCDU25-20-06Az, BS X1NiCrMoCuN25-20-7, AISI 926, AISI N08926, AISI N08367, SAE 926, SAE N08926, SAE N08367, EN 1.4529, ISO X1NiCrMoCuN25-20-7, ISO 4529-089-26-I, ISO AN52A, UNS N08367
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 7.76 - 8 g/cm³ |
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | -100.0 °C | Coefficient of thermal expansion of 1.49E-5 1/K | - |
| - | 20.0 °C | Coefficient of thermal expansion of 1.61E-5 1/K | - |
| - | 100.0 °C | Coefficient of thermal expansion of 1.58E-5 - 1.67E-5 1/K | - |
| - | 200.0 °C | Coefficient of thermal expansion of 1.61E-5 - 1.72E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.65E-5 - 1.77E-5 1/K | - |
| - | 400.0 °C | Coefficient of thermal expansion of 1.69E-5 - 1.81E-5 1/K | - |
| - | 500.0 °C | Coefficient of thermal expansion of 1.73E-5 - 1.84E-5 1/K | - |
| - | 600.0 °C | Coefficient of thermal expansion of 1.88E-5 1/K | - |
| - | 700.0 °C | Coefficient of thermal expansion of 1.91E-5 1/K | - |
| - | 800.0 °C | Coefficient of thermal expansion of 1.94E-5 1/K | - |
| - | 900.0 °C | Coefficient of thermal expansion of 1.97E-5 1/K | - |
| - | 1000.0 °C | Coefficient of thermal expansion of 2E-5 1/K | - |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | -100.0 °C | Specific heat capacity of 440 J/(kg·K) | - |
| - | 20.0 °C | Specific heat capacity of 450 - 472 J/(kg·K) | - |
| - | 100.0 °C | Specific heat capacity of 487 J/(kg·K) | - |
| - | 200.0 °C | Specific heat capacity of 503 J/(kg·K) | - |
| - | 300.0 °C | Specific heat capacity of 512 J/(kg·K) | - |
| - | 400.0 °C | Specific heat capacity of 520 J/(kg·K) | - |
| - | 500.0 °C | Specific heat capacity of 530 J/(kg·K) | - |
| - | 600.0 °C | Specific heat capacity of 541 J/(kg·K) | - |
| - | 700.0 °C | Specific heat capacity of 551 J/(kg·K) | - |
| - | 800.0 °C | Specific heat capacity of 559 J/(kg·K) | - |
| - | 900.0 °C | Specific heat capacity of 565 J/(kg·K) | - |
| - | 1000.0 °C | Specific heat capacity of 571 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 11.9 - 12 W/(m·K) | - |
| - | 100.0 °C | Thermal conductivity of 13.3 W/(m·K) | - |
| - | 200.0 °C | Thermal conductivity of 15.1 W/(m·K) | - |
| - | 300.0 °C | Thermal conductivity of 16.7 W/(m·K) | - |
| - | 400.0 °C | Thermal conductivity of 18.3 W/(m·K) | - |
| - | 500.0 °C | Thermal conductivity of 19.8 W/(m·K) | - |
| - | 600.0 °C | Thermal conductivity of 21.3 W/(m·K) | - |
| - | 700.0 °C | Thermal conductivity of 22.8 W/(m·K) | - |
| - | 800.0 °C | Thermal conductivity of 24.3 W/(m·K) | - |
| - | 900.0 °C | Thermal conductivity of 25.7 W/(m·K) | - |
| - | 1000.0 °C | Thermal conductivity of 27.1 W/(m·K) | - |
| Thermal diffusivity | 20.0 °C | Thermal diffusivity of 3.3 mm²/s | - |
| - | 100.0 °C | Thermal diffusivity of 3.4 mm²/s | - |
| - | 200.0 °C | Thermal diffusivity of 3.7 mm²/s | - |
| - | 300.0 °C | Thermal diffusivity of 4.1 mm²/s | - |
| - | 400.0 °C | Thermal diffusivity of 4.3 mm²/s | - |
| - | 500.0 °C | Thermal diffusivity of 4.5 mm²/s | - |
| - | 600.0 °C | Thermal diffusivity of 4.7 mm²/s | - |
| - | 700.0 °C | Thermal diffusivity of 5 mm²/s | - |
| - | 800.0 °C | Thermal diffusivity of 5.4 mm²/s | - |
| - | 900.0 °C | Thermal diffusivity of 5.7 mm²/s | - |
| - | 1000.0 °C | Thermal diffusivity of 5.8 mm²/s | - |
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.02 % |
| Chromium | Chromium of 19 - 21 % |
| Copper | Copper of 0.5 - 1.5 % |
| Manganese | Manganese of 2 % |
| Molybdenum | Molybdenum of 6 - 7 % |
| Nickel | Nickel of 24 - 26 % |
| Nitrogen | Nitrogen of 0.1 - 0.25 % |
| Phosphorus | Phosphorus of 0.03 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.015 % |
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 9.59E-7 - 1E-6 Ω·m |
| - | 100.0 °C | Electrical resistivity of 1.01E-6 Ω·m |
| - | 200.0 °C | Electrical resistivity of 1.05E-6 Ω·m |
| - | 300.0 °C | Electrical resistivity of 1.1E-6 Ω·m |
| - | 400.0 °C | Electrical resistivity of 1.13E-6 Ω·m |
| - | 500.0 °C | Electrical resistivity of 1.17E-6 Ω·m |
| - | 600.0 °C | Electrical resistivity of 1.19E-6 Ω·m |
| - | 700.0 °C | Electrical resistivity of 1.22E-6 Ω·m |
| - | 800.0 °C | Electrical resistivity of 1.24E-6 Ω·m |
| - | 900.0 °C | Electrical resistivity of 1.26E-6 Ω·m |
| - | 1000.0 °C | Electrical resistivity of 1.28E-6 Ω·m |
SEW 400 Grade X1NiCrMoCuN25-20-6 quenched (+Q) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | -100.0 °C | Elastic modulus of 206 GPa | - |
| - | 20.0 °C | Elastic modulus of 196 - 198 GPa | - |
| - | 100.0 °C | Elastic modulus of 190 - 193 GPa | - |
| - | 200.0 °C | Elastic modulus of 182 - 183 GPa | - |
| - | 300.0 °C | Elastic modulus of 174 - 175 GPa | - |
| - | 400.0 °C | Elastic modulus of 166 - 172 GPa | - |
| - | 500.0 °C | Elastic modulus of 158 - 159 GPa | - |
| - | 600.0 °C | Elastic modulus of 150 GPa | - |
| - | 700.0 °C | Elastic modulus of 142 GPa | - |
| - | 800.0 °C | Elastic modulus of 134 GPa | - |
| - | 900.0 °C | Elastic modulus of 127 GPa | - |
| - | 1000.0 °C | Elastic modulus of 120 GPa | - |
| Elongation | 20.0 °C | Elongation of 40 % | - |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 35 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Tensile strength | 20.0 °C | Tensile strength of 600 - 800 MPa | - |
| Tensile strength, transverse | 20.0 °C | Tensile strength, transverse of 600 - 800 MPa | - |
| Yield strength Rp0.2 | 20.0 °C | Yield strength Rp0.2 of 270 MPa | - |
| - | 50.0 °C | Yield strength Rp0.2 of 240 MPa | - |
| - | 100.0 °C | Yield strength Rp0.2 of 230 MPa | - |
| - | 150.0 °C | Yield strength Rp0.2 of 210 MPa | - |
| - | 200.0 °C | Yield strength Rp0.2 of 190 MPa | - |
| - | 250.0 °C | Yield strength Rp0.2 of 180 MPa | - |
| - | 300.0 °C | Yield strength Rp0.2 of 170 MPa | - |
| - | 350.0 °C | Yield strength Rp0.2 of 160 MPa | - |
| - | 400.0 °C | Yield strength Rp0.2 of 140 MPa | - |
| - | 450.0 °C | Yield strength Rp0.2 of 130 MPa | - |
| - | 500.0 °C | Yield strength Rp0.2 of 120 MPa | - |
| - | 550.0 °C | Yield strength Rp0.2 of 105 MPa | - |
| Yield strength Rp0.2, transverse | 20.0 °C | Yield strength Rp0.2, transverse of 270 MPa | - |
| Yield strength Rp1.0 | 20.0 °C | Yield strength Rp1.0 of 310 MPa | - |
| - | 50.0 °C | Yield strength Rp1.0 of 280 MPa | - |
| - | 100.0 °C | Yield strength Rp1.0 of 270 MPa | - |
| - | 150.0 °C | Yield strength Rp1.0 of 245 MPa | - |
| - | 200.0 °C | Yield strength Rp1.0 of 225 MPa | - |
| - | 250.0 °C | Yield strength Rp1.0 of 215 MPa | - |
| - | 300.0 °C | Yield strength Rp1.0 of 205 MPa | - |
| - | 350.0 °C | Yield strength Rp1.0 of 190 MPa | - |
| - | 400.0 °C | Yield strength Rp1.0 of 170 MPa | - |
| - | 450.0 °C | Yield strength Rp1.0 of 160 MPa | - |
| - | 500.0 °C | Yield strength Rp1.0 of 150 MPa | - |
| - | 550.0 °C | Yield strength Rp1.0 of 135 MPa | - |
| Yield strength Rp1.0, transverse | 20.0 °C | Yield strength Rp1.0, transverse of 310 MPa | - |
Our commitment to trust and integrity shines through every project we undertake.
-- Our promise
Similar or equivalent steel materials
- VDM® Alloy 926
- Sandvik 254 SMO
- EN 10272 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)
- EN 10028-7 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)
- EN 10216-5 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)
- EN 10217-7 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)
- EN 10088-1 Grade X1NiCrMoCuN25-20-7 solution heat-treated and quenched
- SAE J405 Grade N08367
- SAE J405 Grade N08926
Get a quote