SAE J775 Grade EV-13 For Mechanical Tests: ST+P
Equivalent material: AISI EV-13, UNS S63013
SAE J775 Grade EV-13 For Mechanical Tests: ST+P general
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Density | 23.0 °C | Density of 7.9 - 8.2 g/cm³ | Typical for Austenitic Stainless Steel |
SAE J775 Grade EV-13 For Mechanical Tests: ST+P thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 23.0 °C | Coefficient of thermal expansion of 1.7E-5 - 1.9E-5 1/K | Typical for Austenitic Stainless Steel |
| Melting point | - | Melting point of 1230 - 1480 °C | Typical for Austenitic Stainless Steel |
| Specific heat capacity | 23.0 °C | Specific heat capacity of 440 J/(kg·K) | Typical for Austenitic Stainless Steel |
| Thermal conductivity | 23.0 °C | Thermal conductivity of 11 - 21 W/(m·K) | Typical for Austenitic Stainless Steel |
SAE J775 Grade EV-13 For Mechanical Tests: ST+P chemical
| Property | Value | Comment |
|---|---|---|
| Carbon | Carbon of 0.47 - 0.57 % | - |
| Chromium | Chromium of 20 - 22 % | - |
| Iron | Iron of 60.43 - 65.83 % | Balance |
| Manganese | Manganese of 11 - 13 % | - |
| Nitrogen | Nitrogen of 0.4 - 0.5 % | - |
| Phosphorus | Phosphorus of 0.03 % | - |
| Silicon | Silicon of 2 - 3 % | - |
| Sulfur | Sulfur of 0.05 % | - |
SAE J775 Grade EV-13 For Mechanical Tests: ST+P electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Electrical resistivity | 23.0 °C | Electrical resistivity of 8.5E-7 Ω·m | Typical for Austenitic Stainless Steel |
SAE J775 Grade EV-13 For Mechanical Tests: ST+P mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 23.0 °C | Elastic modulus of 195 GPa | Typical for Austenitic Stainless Steel |
| Elongation A5 | 23.0 °C | Elongation A5 of 57 % | - |
| Hardness, Rockwell C | 23.0 °C | Hardness, Rockwell C of 35 [-] | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Austenitic Stainless Steel |
| Reduction of area | 23.0 °C | Reduction of area of 5 % | - |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Austenitic Stainless Steel |
| Tensile strength | 23.0 °C | Tensile strength of 1080 MPa | - |
| Yield strength | 23.0 °C | Yield strength of 520 MPa | - |
Our commitment to craftsmanship ensures excellence in every steel product we deliver.
-- Our promise
Get a quote