SAE J438b Grade D7
Equivalent material: DIN 1.2380, DIN X220CrVMo13-4, AFNOR Z230CVA12.04, BS BD7, AISI D7, EN 1.2380, GOST KH12MF4, UNS T30407
SAE J438b Grade D7 general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.72 - 8 g/cm³ |
Typical for Tool And Machining Steel |
SAE J438b Grade D7 thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1E-5 - 1.3E-5 1/K |
Typical for Tool And Machining Steel |
| Melting point |
- |
Melting point of 1370 - 1425 °C |
Typical for Tool And Machining Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 420 - 460 J/(kg·K) |
Typical for Tool And Machining Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 17 - 42 W/(m·K) |
Typical for Tool And Machining Steel |
SAE J438b Grade D7 chemical
| Property |
Value |
| Carbon |
Carbon of 2.15 - 2.5 % |
| Chromium |
Chromium of 11.5 - 13.5 % |
| Manganese |
Manganese of 0.3 - 0.5 % |
| Molybdenum |
Molybdenum of 0.7 - 1.2 % |
| Silicon |
Silicon of 0.3 - 0.5 % |
| Vanadium |
Vanadium of 3.8 - 4.4 % |
SAE J438b Grade D7 mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 203 - 211 GPa |
Typical for Tool And Machining Steel |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Tool And Machining Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 79 GPa |
Typical for Tool And Machining Steel |
Our high-performance steel materials deliver strength, performance, and success.
-- Our promise
Similar or equivalent steel materials
Get a quote