EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated introduction

The steel HX300PD (X=roll condition, P=phosphorus alloyed, D=hot-dip coatable) is producible with the following coatings:
- HX300PD+Z (plating Zn) with coating weights (double-sided) of 100, 140, 200, 225 and 275 g/m² (100 g approximate 7,1 µm per side)
- HX300PD+ZF (plating Zn-Fe) with coating weights (double-sided) of 100 and 120 g/m² (100 g approximate 7,1 µm per side)
- HX300PD+ZA (plating Zn-Al) with coating weights (double-sided) of 095, 130, 185, 200 and 255 g/m² (95 g approximate 7,2 µm per side)
- HX300PD+AZ (plating Al-Zn) with coating weights (double-sided) of 100, 150 and 185 g/m² (100 g approximate 13,3 µm per side)
- HX300PD+AS (plating Al-Si) with coating weights (double-sided) of 060 and 080 g/m² (100 g approximate 17 µm per side)
The hot dip galvanizing refined flat products are available by arrangement on ordering with different coating weights (also per side).
Following surface protection types can be delivered: chemical passivated, oiled, chemical passivated and oiled, sealed, phosphated, phosphated and oiled.
Mechanical properties are warranted for a period of 3 months for Bake-hardening steels and for a period of 6 months after provision of the products for all other sorts. The same terms are valid for freedom from stretcher strains (surface type B and C).
It is suitable for usual welding methods. For higher coating weights on welding are where approppriate necessary special measures.
Furthermore suitability for joining by sticking as well as for application of organic coatings.
Application:
household appliances industry, construction trade, electrical industry, furniture industry, car industry.

Equivalent material: DIN 1.0443, EN H300PD, EN 1.0443

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated general

Property Temperature Value Comment
Density 20.0 °C Density of 7.8 - 7.9 g/cm³ Typical for Low Carbon Steel

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated thermal

Property Temperature Value Comment
Coefficient of thermal expansion 20.0 °C Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K Typical for Low Carbon Steel
Melting point - Melting point of 1480 - 1526 °C Typical for Low Carbon Steel

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated chemical

Property Value
Aluminium Aluminium of 0.02 %
Carbon Carbon of 0.11 %
Manganese Manganese of 0.7 %
Phosphorus Phosphorus of 0.12 %
Silicon Silicon of 0.5 %
Sulfur Sulfur of 0.025 %

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated electrical

Property Value Comment
Curie temperature Curie temperature of 770 °C Typical for Low Carbon Steel

EN 10292 Grade HX300PD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated mechanical

Property Temperature Value Comment
Elastic modulus 20.0 °C Elastic modulus of 200 - 215 GPa Typical for Low Carbon Steel
Elongation A80, transverse 20.0 °C Elongation A80, transverse of 26 % -
Poisson's ratio 20.0 °C Poisson's ratio of 0.29 [-] Typical for Low Carbon Steel
Tensile strength, transverse 20.0 °C Tensile strength, transverse of 400 - 480 MPa -
Yield strength Rp0.2, transverse 20.0 °C Yield strength Rp0.2, transverse of 300 - 360 MPa -

Trust our skilled artisans to deliver precision-crafted steel products with impeccable finishes, adding a touch of sophistication to your projects.

-- Our promise

Similar or equivalent steel materials

Get a quote