EN 10270-2 Grade VDSiCr oil quenched and tempered
EN 10270-2 Grade VDSiCr oil quenched and tempered introduction
The round, oil hardened and tempered alloy steel wire VDSiCr with high fatigue strength and high tensile strength is used mainly for torsion loaded springs (tension and compression springs) up to 100 °C.
It will be delivered in rings, in coils or as bars and, if not otherwise arranged, thin oiled.
Equivalent material: IS VDSiCr, ISO VDSiCr, JIS SWOSC-V, DIN VD SiCr, AFNOR VDSiCr, BS VDSiCr
EN 10270-2 Grade VDSiCr oil quenched and tempered general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 g/cm³ |
Typical for Steel |
EN 10270-2 Grade VDSiCr oil quenched and tempered chemical
| Property |
Value |
| Carbon |
Carbon of 0.5 - 0.6 % |
| Chromium |
Chromium of 0.5 - 0.8 % |
| Copper |
Copper of 0.06 % |
| Manganese |
Manganese of 0.5 - 0.9 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 1.2 - 1.6 % |
| Sulfur |
Sulfur of 0.02 % |
EN 10270-2 Grade VDSiCr oil quenched and tempered mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 206 GPa |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Reduction of area |
20.0 °C |
Reduction of area of 35 - 50 % |
- |
| Shear modulus |
20.0 °C |
Shear modulus of 79.5 - 81.5 GPa |
- |
| Tensile strength |
20.0 °C |
Tensile strength of 1670 - 2230 MPa |
- |
Our durable steel materials withstand the test of time and challenging environments.
-- Our promise
Similar or equivalent steel materials
Get a quote