EN 10270-2 Grade VDCrV oil quenched and tempered
EN 10270-2 Grade VDCrV oil quenched and tempered introduction
The round, oil hardened and tempered alloy steel wire VDCrV with high fatigue strength and medium tensile strength is used mainly for torsion loaded springs (tension and compression springs) up to 80 °C.
It will be delivered in rings, in coils or as bars and, if not otherwise arranged, thin oiled.
Equivalent material: IS VDCrV-B, ISO VDCrV, DIN VD CrV, AFNOR VDCrV, BS VDCrV
EN 10270-2 Grade VDCrV oil quenched and tempered general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Chromium Vanadium Steel |
EN 10270-2 Grade VDCrV oil quenched and tempered thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.2E-5 1/K |
Typical for Chromium Vanadium Steel |
| Melting point |
- |
Melting point of 1382 - 1529 °C |
Typical for Chromium Vanadium Steel |
EN 10270-2 Grade VDCrV oil quenched and tempered chemical
| Property |
Value |
| Carbon |
Carbon of 0.62 - 0.72 % |
| Chromium |
Chromium of 0.4 - 0.6 % |
| Copper |
Copper of 0.06 % |
| Manganese |
Manganese of 0.5 - 0.9 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.15 - 0.3 % |
| Sulfur |
Sulfur of 0.02 % |
| Vanadium |
Vanadium of 0.15 - 0.25 % |
EN 10270-2 Grade VDCrV oil quenched and tempered mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 206 GPa |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Chromium Vanadium Steel |
| Reduction of area |
20.0 °C |
Reduction of area of 40 - 50 % |
- |
| Shear modulus |
20.0 °C |
Shear modulus of 79.5 - 81.5 GPa |
- |
| Tensile strength |
20.0 °C |
Tensile strength of 1390 - 2060 MPa |
- |
Have confidence in the strength and durability of our steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote