EN 10270-2 Grade FDSiCr oil quenched and tempered
EN 10270-2 Grade FDSiCr oil quenched and tempered introduction
The round, oil hardened and tempered alloy steel wire FDSiCr for static loading and high tensile strength is used mainly for torsion loaded springs (tension and compression springs).
It will be delivered in rings, in coils or as bars and, if not otherwise arranged, thin oiled.
Equivalent material: IS FDSiCr, ISO FDSiCr, JIS SWOSC-B, DIN FD SiCr, AFNOR FDSiCr, BS FDSiCr
EN 10270-2 Grade FDSiCr oil quenched and tempered general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 g/cm³ |
Typical for Steel |
EN 10270-2 Grade FDSiCr oil quenched and tempered chemical
| Property |
Value |
| Carbon |
Carbon of 0.5 - 0.6 % |
| Chromium |
Chromium of 0.5 - 0.8 % |
| Copper |
Copper of 0.12 % |
| Manganese |
Manganese of 0.5 - 0.9 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 1.2 - 1.6 % |
| Sulfur |
Sulfur of 0.025 % |
EN 10270-2 Grade FDSiCr oil quenched and tempered mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 206 GPa |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Reduction of area |
20.0 °C |
Reduction of area of 30 - 45 % |
- |
| Shear modulus |
20.0 °C |
Shear modulus of 79.5 - 81.5 GPa |
- |
| Tensile strength |
20.0 °C |
Tensile strength of 1550 - 2300 MPa |
- |
Tailor-made steel solutions to meet your unique requirements.
-- Our promise
Similar or equivalent steel materials
Get a quote