EN 10210-1 Grade S460NH hot finished
EN 10210-1 Grade S460NH hot finished introduction
Hot finished weldable structural hollow sections with circular, square, rectangular or elliptical cross-section for the steel and plant construction, civil engineering and vehicle construction.
Equivalent material: ISO S460NH, DIN StE460N, DIN 1.8953, EN 1.8953
EN 10210-1 Grade S460NH hot finished general
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Density | 23.0 °C | Density of 7.8 g/cm³ | Typical for Steel |
EN 10210-1 Grade S460NH hot finished chemical
| Property | Value |
|---|---|
| Aluminium | Aluminium of 0.02 % |
| Carbon | Carbon of 0.22 % |
| Chromium | Chromium of 0.3 % |
| Copper | Copper of 0.7 % |
| Manganese | Manganese of 1 - 1.7 % |
| Molybdenum | Molybdenum of 0.1 % |
| Nickel | Nickel of 0.8 % |
| Niobium | Niobium of 0.05 % |
| Nitrogen | Nitrogen of 0.03 % |
| Phosphorus | Phosphorus of 0.04 % |
| Silicon | Silicon of 0.6 % |
| Sulfur | Sulfur of 0.03 % |
| Titanium | Titanium of 0.03 % |
| Vanadium | Vanadium of 0.2 % |
EN 10210-1 Grade S460NH hot finished mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 23.0 °C | Elastic modulus of 190 - 210 GPa | Typical for Steel |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Steel |
| Tensile strength | 20.0 °C | Tensile strength of 540 - 720 MPa | - |
| Yield strength | 20.0 °C | Yield strength of 430 - 460 MPa | - |
We are dedicated to helping you achieve success through our reliable steel solutions.
-- Our promise
Get a quote