EN 10209 Grade DC05EK
EN 10209 Grade DC05EK introduction
This grade is suitable for light and deep drawing and two-side enamelling adapted to the client's process (wet or dry enamelling). It also offers excellent resistance to "fish scale" defects. We can guarantee a minimum TH of 100, in accordance with EN 10209.
After drawing, cold rolled steels for conventional enamelling are used for:
Ground-coat enamelling one coat / one fire
Conventional enamelling two coats / two fires
Grade DC05EK was developed for the manufacture of bathtubs.
EN 10209 Grade DC05EK chemical
| Property |
Value |
Comment |
| Carbon |
Carbon of 0.08 % |
max. |
| Manganese |
Manganese of 0.5 % |
max. |
| Phosphorus |
Phosphorus of 0.025 % |
max. |
| Sulfur |
Sulfur of 0.05 % |
max. |
EN 10209 Grade DC05EK mechanical
| Property |
Value |
Comment |
| Elongation |
Elongation of 36 % |
min. | for thickness 0.7-3 mm | Transverse | A80 |
| Plastic strain ratio |
Plastic strain ratio of 1.5 [-] |
average | for thickness 0.7-3 mm |
| Tensile strength |
Tensile strength of 270 - 350 MPa |
for thickness 0.7-3 mm | Transverse |
| Yield strength |
Yield strength of 140 - 220 MPa |
for thickness 0.7-3 mm | Transverse |
Trust our high-quality steel to forge a brighter and stronger future for your projects.
-- Our promise
Get a quote