EN 10149-2 Grade S700MC thermomechanically rolled
EN 10149-2 Grade S700MC thermomechanically rolled introduction
The thermomechanical rolled steel is used for cold formed components like vehicle frames, axles and special sections.
Equivalent material: AFNOR E690D, DIN HR700LA, IS FeE700, DIN 1.8974, EN 1.8974, DIN QStE 690 TM, BS 75F70
EN 10149-2 Grade S700MC thermomechanically rolled general
| Property |
Value |
Comment |
| Density |
Density of 7.8 g/cm³ |
Typical for Steel |
EN 10149-2 Grade S700MC thermomechanically rolled thermal
| Property |
Value |
Comment |
| Coefficient of thermal expansion |
Coefficient of thermal expansion of 11.97 1/K |
Predicted Value |
| Specific heat capacity |
Specific heat capacity of 454.1 J/(kg·K) |
Predicted Value |
| Thermal conductivity |
Thermal conductivity of 37.65 W/(m·K) |
Predicted Value |
EN 10149-2 Grade S700MC thermomechanically rolled chemical
| Property |
Value |
Condition |
Related Standards |
Shape |
| Aluminium |
Aluminium of 0.015 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Boron |
Boron of 0.005 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Carbon |
Carbon of 0.12 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Manganese |
Manganese of 2.1 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Molybdenum |
Molybdenum of 0.5 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Niobium |
Niobium of 0.09 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Phosphorus |
Phosphorus of 0.025 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Silicon |
Silicon of 0.6 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Sulfur |
Sulfur of 0.015 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Titanium |
Titanium of 0.22 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
| Vanadium |
Vanadium of 0.2 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
EN 10149-2 Grade S700MC thermomechanically rolled electrical
| Property |
Value |
Comment |
| Electrical conductivity |
Electrical conductivity of 7 S/m |
Predicted Value |
| Electrical resistivity |
Electrical resistivity of 34 Ω·m |
Predicted Value |
EN 10149-2 Grade S700MC thermomechanically rolled mechanical
| Property |
Temperature |
Value |
Condition |
Related Standards |
Shape |
Comment |
| Elastic modulus |
- |
Elastic modulus of 190 - 210 GPa |
- |
- |
- |
Typical for Steel |
| Elongation |
- |
Elongation of 13.0 % |
- |
- |
- |
Predicted Value, A200 |
| - |
- |
Elongation of 13.2 % |
- |
- |
- |
Predicted Value, Transverse |
| - |
- |
Elongation of 17.0 % |
- |
- |
- |
Predicted Value, A50 |
| - |
- |
Elongation of 17.4 % |
- |
- |
- |
Predicted Value, A80 Transverse |
| - |
- |
Elongation of 17.9 % |
- |
- |
- |
Predicted Value, A5 |
| - |
20 °C |
Elongation of 10 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
A80 |
| - |
20 °C |
Elongation of 10 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
- |
| - |
20 °C |
Elongation of 12 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
A80 |
| - |
20 °C |
Elongation of 12 % |
thermomechanically rolled |
EN 10149-2 |
Flat |
- |
| Hardness, Brinell |
- |
Hardness, Brinell of 248 [-] |
- |
- |
- |
Predicted Value, Transverse |
| Poisson's ratio |
- |
Poisson's ratio of 0.3 [-] |
- |
- |
- |
Typical for Steel |
| Reduction of area |
- |
Reduction of area of 38.7 % |
- |
- |
- |
Predicted Value |
| - |
- |
Reduction of area of 44.1 % |
- |
- |
- |
Predicted Value, Transverse |
| Shear modulus |
- |
Shear modulus of 80.1 GPa |
- |
- |
- |
Predicted Value |
| Shear strength |
- |
Shear strength of 585.9 MPa |
- |
- |
- |
Predicted Value |
| Tensile strength |
20 °C |
Tensile strength of 750 - 950 MPa |
thermomechanically rolled |
EN 10149-2 |
Flat |
- |
| Yield strength |
- |
Yield strength of 294.8 MPa |
- |
- |
- |
Predicted Value, RP1 |
| - |
- |
Yield strength of 328.8 MPa |
- |
- |
- |
Predicted Value, RP1 Transverse |
| - |
- |
Yield strength of 506.8 MPa |
- |
- |
- |
Predicted Value, RP02 Transverse |
| - |
- |
Yield strength of 547.5 MPa |
- |
- |
- |
Predicted Value, RP05 |
| - |
- |
Yield strength of 551.3 MPa |
- |
- |
- |
Predicted Value, Transverse |
| - |
- |
Yield strength of 580.4 MPa |
- |
- |
- |
Predicted Value, RP02 |
| - |
- |
Yield strength of 739 MPa |
- |
- |
- |
Predicted Value, RP002 |
| - |
20 °C |
Yield strength of 700 MPa |
thermomechanically rolled |
EN 10149-2 |
Flat |
- |
Collaborate with us to bring your vision to life using our premium-grade steel materials.
-- Our promise
Similar or equivalent steel materials
Get a quote