EN 10095 Grade X10NiCrSi35-19 solution annealed (+AT)

EN 10095 Grade X10NiCrSi35-19 solution annealed (+AT) introduction

Steel X10NiCrSi35-19 shows a highest application temperature of up to 1100 °C in air.

Equivalent material: ASTM B511UNSN08330, ASTM B536UNSN08330, SAE 30330, SAE RA330, UNS N08330, DIN 1.4886, EN 1.4886

Property	Temperature	Value
Density	20.0 °C	Density of 8 g/cm³

Property	Temperature	Value
Coefficient of thermal expansion	200.0 °C	Coefficient of thermal expansion of 1.55E-5 1/K
-	400.0 °C	Coefficient of thermal expansion of 1.6E-5 1/K
-	600.0 °C	Coefficient of thermal expansion of 1.7E-5 1/K
-	800.0 °C	Coefficient of thermal expansion of 1.77E-5 1/K
-	1000.0 °C	Coefficient of thermal expansion of 1.8E-5 1/K
Max service temperature, long	-	Max service temperature, long of 0 - 1100 °C
Specific heat capacity	20.0 °C	Specific heat capacity of 460 J/(kg·K)
-	600.0 °C	Specific heat capacity of 650 J/(kg·K)
Thermal conductivity	20.0 °C	Thermal conductivity of 12 W/(m·K)
-	500.0 °C	Thermal conductivity of 19.5 W/(m·K)

Property	Temperature	Value
Electrical resistivity	20.0 °C	Electrical resistivity of 1E-6 Ω·m

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	Elastic modulus of 190 - 210 GPa	Typical for Steel
Elongation	20.0 °C	Elongation of 40 %	-
Hardness, Brinell	20.0 °C	Hardness, Brinell of 200 [-]	-
Poisson's ratio	23.0 °C	Poisson's ratio of 0.3 [-]	Typical for Steel
Tensile strength	20.0 °C	Tensile strength of 500 - 650 MPa	-
Yield strength Rp0.2	20.0 °C	Yield strength Rp0.2 of 270 MPa	-
Yield strength Rp1.0	20.0 °C	Yield strength Rp1.0 of 300 MPa	-

Partner with us to fuel your growth trajectory, leveraging our reliable supply of high-quality steel for your expanding needs.

-- Our promise