EN 10088-1 Grade X6CrNi17-1 soft annealed (+A)
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) introduction
The ferritic patented special grade X6CrNi17-1is applicated in annealed condition in the form of cold rolled strip for valves, shafts and rotor discs. Resistance to intercrystalline corrosion in delivery corrosion but not in welded condition
Equivalent material: ISO X6CrNi17-1, ISO 4017-430-91-E, ISO FP18H, ISO FP17H, DIN 1.4017, EN 1.4017
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) general
| Property | Temperature | Value |
|---|---|---|
| Density | 20.0 °C | Density of 7.7 g/cm³ |
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 100.0 °C | Coefficient of thermal expansion of 1.02E-5 1/K | - |
| - | 300.0 °C | Coefficient of thermal expansion of 1.08E-5 1/K | - |
| Melting point | - | Melting point of 1425 - 1530 °C | Typical for Ferritic Stainless Steel |
| Specific heat capacity | 20.0 °C | Specific heat capacity of 460 J/(kg·K) | - |
| Thermal conductivity | 20.0 °C | Thermal conductivity of 30 W/(m·K) | - |
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.08 % |
| Chromium | Chromium of 16 - 18 % |
| Manganese | Manganese of 1 % |
| Nickel | Nickel of 1.2 - 1.6 % |
| Phosphorus | Phosphorus of 0.04 % |
| Silicon | Silicon of 1 % |
| Sulfur | Sulfur of 0.015 % |
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) electrical
| Property | Temperature | Value |
|---|---|---|
| Electrical resistivity | 20.0 °C | Electrical resistivity of 7E-7 Ω·m |
EN 10088-1 Grade X6CrNi17-1 soft annealed (+A) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 20.0 °C | Elastic modulus of 220 GPa | - |
| - | 100.0 °C | Elastic modulus of 215 GPa | - |
| - | 200.0 °C | Elastic modulus of 210 GPa | - |
| - | 300.0 °C | Elastic modulus of 205 GPa | - |
| - | 400.0 °C | Elastic modulus of 195 GPa | - |
| Elongation | 20.0 °C | Elongation of 12 % | - |
| Elongation A80 | 20.0 °C | Elongation A80 of 12 % | - |
| Elongation A80, transverse | 20.0 °C | Elongation A80, transverse of 12 % | - |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 12 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Ferritic Stainless Steel |
| Shear modulus | 23.0 °C | Shear modulus of 77 GPa | Typical for Ferritic Stainless Steel |
| Tensile strength | 20.0 °C | Tensile strength of 500 - 750 MPa | - |
| Tensile strength, transverse | 20.0 °C | Tensile strength, transverse of 500 - 750 MPa | - |
| Yield strength Rp0.2 | 20.0 °C | Yield strength Rp0.2 of 330 MPa | - |
| Yield strength Rp0.2, transverse | 20.0 °C | Yield strength Rp0.2, transverse of 350 MPa | - |
Partner with us to achieve engineering excellence by leveraging our high-performance steel materials.
-- Our promise
Get a quote