EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000)
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) introduction
Material X5CrNiMoCuNb14-5 is hardenable and used in the form of rods, wire rod and profiles.
Equivalent material: ISO 4594-155-92-E, ISO PM21I, ISO X5CrNiMoCuNb14-5, DIN 1.4594, AFNOR Z7CNU15-05, EN 1.4594, ASTM 14-5PH, ASTM XM-25, UNS S45000, UNS S15500
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.8 g/cm³ |
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) thermal
| Property |
Temperature |
Value |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.09E-5 1/K |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.11E-5 1/K |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 16 W/(m·K) |
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) chemical
| Property |
Value |
| Carbon |
Carbon of 0.07 % |
| Chromium |
Chromium of 13 - 15 % |
| Copper |
Copper of 1.2 - 2 % |
| Manganese |
Manganese of 1 % |
| Molybdenum |
Molybdenum of 1.2 - 2 % |
| Nickel |
Nickel of 5 - 6 % |
| Niobium |
Niobium of 0.15 - 0.6 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.7 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 7.1E-7 Ω·m |
EN 10088-1 Grade X5CrNiMoCuNb14-5 precipitation hardened (+P1000) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 195 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 185 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 175 GPa |
- |
| - |
400.0 °C |
Elastic modulus of 170 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 10 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 1000 - 1200 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 860 MPa |
- |
| - |
100.0 °C |
Yield strength Rp0.2 of 785 MPa |
- |
| - |
150.0 °C |
Yield strength Rp0.2 of 755 MPa |
- |
| - |
200.0 °C |
Yield strength Rp0.2 of 730 MPa |
- |
| - |
250.0 °C |
Yield strength Rp0.2 of 710 MPa |
- |
| - |
300.0 °C |
Yield strength Rp0.2 of 690 MPa |
- |
Experience the innovative edge of our steel solutions, designed to meet evolving industry needs.
-- Our promise
Similar or equivalent steel materials
Get a quote