EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT)
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) introduction
The austenitic-ferritic material X2CrNiMoCuN25-6-3 is used in solution annealed condition in the form of cold rolled strip, warm rolled strip and warm rolled sheet as well as for rods, wire rod and profiles. It is resistant to intercrystalline corrosion also in sensitized condition.
Equivalent material: ISO X2CrNiMoCuN25-5-3, ISO X2CrNiMoCuN25-6-3, UNS S32520, UNS S32550, ASTM F59, ASTM S32520, SAE S32520, GB 03Cr25Ni6Mo3Cu2N, GB S25554, ISO X3CrNiMoCuN26-6-3-2, ISO 4507-325-20-I, ISO 4507-325-50-X, ISO DM34A, ISO DM35F, ASTM A240UNSS32520, ASTM A480UNSS32520, ASTM A959UNSS32520, DIN 1.4507, DIN X2CrNiMoCuN25-6-3, AFNOR Z3CNDU25-06Az, BS X2CrNiMoCuN25-6-3, AISI S32520, AISI S32550, SAE S32550, EN X2CrNiMoCuN26-6-3, EN 1.4507, ASTM F61, ASTM 255
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) general
| Property |
Temperature |
Value |
| Density |
20.0 °C |
Density of 7.8 g/cm³ |
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
100.0 °C |
Coefficient of thermal expansion of 1.3E-5 1/K |
- |
| - |
200.0 °C |
Coefficient of thermal expansion of 1.35E-5 1/K |
- |
| - |
300.0 °C |
Coefficient of thermal expansion of 1.4E-5 1/K |
- |
| Max service temperature |
- |
Max service temperature of 300 °C |
Typical for Duplex Stainless Steel |
| Melting point |
- |
Melting point of 1375 - 1450 °C |
Typical for Duplex Stainless Steel |
| Specific heat capacity |
20.0 °C |
Specific heat capacity of 500 J/(kg·K) |
- |
| Thermal conductivity |
20.0 °C |
Thermal conductivity of 15 W/(m·K) |
- |
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) chemical
| Property |
Value |
| Carbon |
Carbon of 0.03 % |
| Chromium |
Chromium of 24 - 26 % |
| Copper |
Copper of 1 - 2.5 % |
| Manganese |
Manganese of 2 % |
| Molybdenum |
Molybdenum of 3 - 4 % |
| Nickel |
Nickel of 6 - 8 % |
| Nitrogen |
Nitrogen of 0.2 - 0.3 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.7 % |
| Sulfur |
Sulfur of 0.015 % |
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) electrical
| Property |
Temperature |
Value |
| Electrical resistivity |
20.0 °C |
Electrical resistivity of 8E-7 Ω·m |
EN 10088-1 Grade X2CrNiMoCuN25-6-3 solution annealed (+AT) mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
20.0 °C |
Elastic modulus of 200 GPa |
- |
| - |
100.0 °C |
Elastic modulus of 194 GPa |
- |
| - |
200.0 °C |
Elastic modulus of 186 GPa |
- |
| - |
300.0 °C |
Elastic modulus of 180 GPa |
- |
| Elongation |
20.0 °C |
Elongation of 25 % |
- |
| - |
100.0 °C |
Elongation of 25 % |
- |
| Elongation A80, transverse |
20.0 °C |
Elongation A80, transverse of 20 - 25 % |
- |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 20 - 25 % |
- |
| Hardness, Brinell |
20.0 °C |
Hardness, Brinell of 270 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Duplex Stainless Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 77 GPa |
Typical for Duplex Stainless Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 700 - 1050 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 730 - 1000 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 500 MPa |
- |
| - |
100.0 °C |
Yield strength Rp0.2 of 450 MPa |
- |
| - |
150.0 °C |
Yield strength Rp0.2 of 420 MPa |
- |
| - |
200.0 °C |
Yield strength Rp0.2 of 400 MPa |
- |
| - |
250.0 °C |
Yield strength Rp0.2 of 380 MPa |
- |
| Yield strength Rp0.2, transverse |
20.0 °C |
Yield strength Rp0.2, transverse of 530 - 550 MPa |
- |
Our steel embodies these qualities to deliver exceptional results.
-- Our promise
Similar or equivalent steel materials
Get a quote