EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT)

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) introduction

The steel 18MnMo4-5 is a heat-resistant alloy high-grade steel for application in pressure vessel construction.
Max. application temp.: 450 °C

Equivalent material: ASTM A302 Grade A, UNS K12021, IS 18MnMo4-5, DIN 1.5414, EN 1.5414, DIN 18MnMo4-5

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) general

Property Value Comment
Density Density of 7.8 - 7.9 g/cm³ Typical for Molybdenum Steel

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) thermal

Property Value Condition Related Standards Shape Comment
Coefficient of thermal expansion Coefficient of thermal expansion of 1.29e-05 1/K - - - Typical for Molybdenum Steel
Max service temperature Max service temperature of 20 - 450 °C quenched and tempered (+QT) EN 10028-2 Flat Long
- Max service temperature of 450 °C quenched and tempered (+QT) EN 10028-2 Flat Long
Melting point Melting point of 1382 - 1529 °C - - - Typical for Molybdenum Steel
Specific heat capacity Specific heat capacity of 456 J/(kg·K) - - - Typical for Molybdenum Steel
Thermal conductivity Thermal conductivity of 37 - 48 W/(m·K) - - - Typical for Molybdenum Steel

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) chemical

Property Value Condition Related Standards Shape
Carbon Carbon of 0.2 % quenched and tempered (+QT) EN 10028-2 Flat
Chromium Chromium of 0.3 % quenched and tempered (+QT) EN 10028-2 Flat
Copper Copper of 0.3 % quenched and tempered (+QT) EN 10028-2 Flat
Manganese Manganese of 0.9 - 1.5 % quenched and tempered (+QT) EN 10028-2 Flat
Molybdenum Molybdenum of 0.45 - 0.6 % quenched and tempered (+QT) EN 10028-2 Flat
Nickel Nickel of 0.3 % quenched and tempered (+QT) EN 10028-2 Flat
Nitrogen Nitrogen of 0.012 % quenched and tempered (+QT) EN 10028-2 Flat
Phosphorus Phosphorus of 0.015 % quenched and tempered (+QT) EN 10028-2 Flat
Silicon Silicon of 0.4 % quenched and tempered (+QT) EN 10028-2 Flat
Sulfur Sulfur of 0.005 % quenched and tempered (+QT) EN 10028-2 Flat
- Sulfur of 0.01 % quenched and tempered (+QT) EN 10028-2 Flat

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) electrical

Property Value Comment
Electrical conductivity Electrical conductivity of 5 S/m Predicted Value
Electrical resistivity Electrical resistivity of 35 Ω·m Predicted Value

EN 10028-2 Grade 18MnMo4-5 quenched and tempered (+QT) mechanical

Property Temperature Value Condition Related Standards Shape Comment
Elastic modulus - Elastic modulus of 200 - 215 GPa - - - Typical for Molybdenum Steel
Elongation - Elongation of 15.9 % - - - Predicted Value, A200
- - Elongation of 16.0 % - - - Predicted Value, A80
- - Elongation of 18.4 % - - - Predicted Value, A80 Transverse
- - Elongation of 19.5 % - - - Predicted Value, A5
- - Elongation of 20.6 % - - - Predicted Value, A50
- 20 °C Elongation of 20 % quenched and tempered (+QT) EN 10028-2 Flat Transverse
- 20 °C Elongation of 20 % quenched and tempered (+QT) EN 10028-2 Flat -
Hardness, Brinell - Hardness, Brinell of 242 [-] - - - Predicted Value, Transverse
Poisson's ratio - Poisson's ratio of 0.29 [-] - - - Typical for Molybdenum Steel
Reduction of area - Reduction of area of 43.0 % - - - Predicted Value
- - Reduction of area of 44.8 % - - - Predicted Value, Transverse
Shear modulus - Shear modulus of 79.5 GPa - - - Predicted Value
Shear strength - Shear strength of 691.1 MPa - - - Predicted Value
Tensile strength 20 °C Tensile strength of 480 - 620 MPa quenched and tempered (+QT) EN 10028-2 Flat Transverse
- 20 °C Tensile strength of 480 - 620 MPa quenched and tempered (+QT) EN 10028-2 Flat -

Experience the power of our steel, meticulously crafted to withstand the toughest challenges and meet the highest industry standards.

-- Our promise

Get a quote