EN 10025 Grade KSt 44-2 untreated
EN 10025 Grade KSt 44-2 untreated introduction
KSt 44-2 is used as grade for roll forming to shape. Its used for welded constructions up to - 25 °C.
Equivalent material: DIN 1.0148, EN 1.0148
EN 10025 Grade KSt 44-2 untreated general
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Density | 23.0 °C | Density of 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
EN 10025 Grade KSt 44-2 untreated thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Coefficient of thermal expansion | 23.0 °C | Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K | Typical for Low Carbon Steel |
| Max service temperature | - | Max service temperature of 500 °C | Typical for Carbon Steel |
| Max service temperature, long | - | Max service temperature, long of -25 - 0 °C | - |
| Melting point | - | Melting point of 1480 - 1526 °C | Typical for Low Carbon Steel |
| Specific heat capacity | 23.0 °C | Specific heat capacity of 465 J/(kg·K) | Typical for Low Carbon Steel |
| Thermal conductivity | 23.0 °C | Thermal conductivity of 25 - 93 W/(m·K) | Typical for Low Carbon Steel |
EN 10025 Grade KSt 44-2 untreated chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.22 % |
| Phosphorus | Phosphorus of 0.05 % |
| Sulfur | Sulfur of 0.05 % |
EN 10025 Grade KSt 44-2 untreated magnetic
| Property | Value | Comment |
|---|---|---|
| Curie temperature | Curie temperature of 770 °C | Typical for Low Carbon Steel |
EN 10025 Grade KSt 44-2 untreated electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Electrical resistivity | 23.0 °C | Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
EN 10025 Grade KSt 44-2 untreated mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 23.0 °C | Elastic modulus of 200 - 215 GPa | Typical for Low Carbon Steel |
| Elongation | 20.0 °C | Elongation of 22 % | - |
| Elongation, transverse | 20.0 °C | Elongation, transverse of 20 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.29 [-] | Typical for Low Carbon Steel |
| Shear modulus | 23.0 °C | Shear modulus of 82 GPa | Typical for Low Carbon Steel |
| Tensile strength | 20.0 °C | Tensile strength of 410 - 540 MPa | - |
| Yield strength | 20.0 °C | Yield strength of 275 MPa | - |
Simplify your procurement process with our comprehensive range of steel products.
-- Our promise
Get a quote