DIN 5512-2 Grade St37-2Cu3G
DIN 5512-2 Grade St37-2Cu3G introduction
Steel with added Cu (0,25 to 0,35%), surface quality 03.
Application:
- sheet for freight cars
- bottom plates, aprons and roof panels in passenger cars and locomotives
- composite sheet hollow construction (e.g. hump plate) for vehicle bodies
- undercarriage and bogies
Equivalent material: DIN St14Cu303m, EN S235JRCu+CR, DIN 1.0169, EN 1.0169
DIN 5512-2 Grade St37-2Cu3G general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 - 7.9 g/cm³ |
Typical for Low Carbon Steel |
DIN 5512-2 Grade St37-2Cu3G thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K |
Typical for Low Carbon Steel |
| Max service temperature |
- |
Max service temperature of 500 °C |
Typical for Carbon Steel |
| Melting point |
- |
Melting point of 1480 - 1526 °C |
Typical for Low Carbon Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 465 J/(kg·K) |
Typical for Low Carbon Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 25 - 93 W/(m·K) |
Typical for Low Carbon Steel |
DIN 5512-2 Grade St37-2Cu3G magnetic
| Property |
Value |
Comment |
| Curie temperature |
Curie temperature of 770 °C |
Typical for Low Carbon Steel |
DIN 5512-2 Grade St37-2Cu3G electrical
| Property |
Temperature |
Value |
Comment |
| Electrical resistivity |
23.0 °C |
Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m |
Typical for Carbon Steel |
DIN 5512-2 Grade St37-2Cu3G mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 200 - 215 GPa |
Typical for Low Carbon Steel |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.29 [-] |
Typical for Low Carbon Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 82 GPa |
Typical for Low Carbon Steel |
Experience the innovative edge of our steel solutions, designed to meet evolving industry needs.
-- Our promise
Similar or equivalent steel materials
Get a quote