DIN 41301 Grade F3 50% cold worked
DIN 41301 Grade F3 50% cold worked introduction
Ni-Fe alloy with specific requirements for the permeability at low field strengths.
Application: audio-frequency transformers in communications technology (sheets, strips, core laminations, tape cores)
DIN 41301 Grade F3 50% cold worked general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 g/cm³ |
Typical for Steel |
DIN 41301 Grade F3 50% cold worked thermal
| Property |
Value |
| Nickel |
Nickel of 50 % |
DIN 41301 Grade F3 50% cold worked mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 190 - 210 GPa |
Typical for Steel |
| Elongation |
20.0 °C |
Elongation of 4 % |
- |
| Hardness, Vickers, 5 |
20.0 °C |
Hardness, Vickers, 5 of 220 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 750 MPa |
- |
| Yield strength Rp0.2 |
20.0 °C |
Yield strength Rp0.2 of 700 MPa |
- |
Harness the power of our innovative steel solutions to drive your industry forward.
-- Our promise
Get a quote