DIN 17182 Grade GS-8Mn7 quenched and tempered (+QT)
DIN 17182 Grade GS-8Mn7 quenched and tempered (+QT) introduction
In comparison to the unalloyed cast steel grades according to DIN 1681, the materials of this group show distinctly higher values of the notch impact energy. As a result of their low carbon content (0.23 per cent maximum), they are well suitable for welding.
Equivalent material: DIN G8Mn7, DIN 1.5015, EN 1.5015
DIN 17182 Grade GS-8Mn7 quenched and tempered (+QT) general
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Density | 23.0 °C | Density of 7.8 g/cm³ | Typical for Steel |
DIN 17182 Grade GS-8Mn7 quenched and tempered (+QT) chemical
| Property | Value |
|---|---|
| Carbon | Carbon of 0.06 - 0.1 % |
| Chromium | Chromium of 0.2 % |
| Manganese | Manganese of 1.5 - 1.8 % |
| Niobium | Niobium of 0.05 % |
| Nitrogen | Nitrogen of 0.02 % |
| Phosphorus | Phosphorus of 0.02 % |
| Silicon | Silicon of 0.6 % |
| Sulfur | Sulfur of 0.015 % |
| Vanadium | Vanadium of 0.1 % |
DIN 17182 Grade GS-8Mn7 quenched and tempered (+QT) mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Elastic modulus | 23.0 °C | Elastic modulus of 190 - 210 GPa | Typical for Steel |
| Elongation | 20.0 °C | Elongation of 22 % | - |
| Poisson's ratio | 23.0 °C | Poisson's ratio of 0.3 [-] | Typical for Steel |
| Tensile strength | 20.0 °C | Tensile strength of 500 - 650 MPa | - |
| Yield strength | 20.0 °C | Yield strength of 350 MPa | - |
Unlock the potential of your projects and drive success with our high-performance steel.
-- Our promise
Get a quote