DIN 17172 Grade StE480.7 TM thermomechanically treated
DIN 17172 Grade StE480.7 TM thermomechanically treated introduction
The steel StE 480.7 TM is produced as welded tube in the conditions thermomechanical treated.
Tubes of this steel are conform acc. 5L, 5LX and 5LS of the American Petroleum Institute (API). The Attention should be paid to the technical regulation for combustible liquids TRbF 301.
Application:
pipelines for combustible liquids (e.g. petroleum and his products) and for compressed or liquid combustible gases
Equivalent material: AFNOR TSE480, ISO L48TMC, DIN L485MB, DIN 1.8977, EN L485MB, EN 1.8977
DIN 17172 Grade StE480.7 TM thermomechanically treated general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.8 g/cm³ |
Typical for Steel |
DIN 17172 Grade StE480.7 TM thermomechanically treated chemical
| Property |
Value |
| Carbon |
Carbon of 0.16 % |
| Manganese |
Manganese of 1.1 - 1.7 % |
| Phosphorus |
Phosphorus of 0.04 % |
| Silicon |
Silicon of 0.55 % |
| Sulfur |
Sulfur of 0.25 % |
DIN 17172 Grade StE480.7 TM thermomechanically treated mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 190 - 210 GPa |
Typical for Steel |
| Elongation, transverse |
20.0 °C |
Elongation, transverse of 18 % |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Steel |
| Tensile strength |
20.0 °C |
Tensile strength of 600 - 750 MPa |
- |
| Tensile strength, transverse |
20.0 °C |
Tensile strength, transverse of 600 - 750 MPa |
- |
| Yield strength |
20.0 °C |
Yield strength of 480 MPa |
- |
| Yield strength, transverse |
20.0 °C |
Yield strength, transverse of 480 MPa |
- |
Our rigorous quality control measures guarantee the reliability and consistency of our steel products.
-- Our promise
Similar or equivalent steel materials
Get a quote