DIN 17111 Grade U10S10 hot rolled

DIN 17111 Grade U10S10 hot rolled

DIN 17111 Grade U10S10 hot rolled introduction

The steel is used for the manufacture of bolts, nuts and rivets (and similar shaped parts).

Equivalent material: AISI 1110, SAE 1110, UNS G11100, ASTM 1110, DIN 1.0702, JIS SUM11, EN 1.0702

DIN 17111 Grade U10S10 hot rolled general

Property Temperature Value
Density 20.0 °C Density of 7.85 g/cm³

DIN 17111 Grade U10S10 hot rolled thermal

Property Temperature Value Comment
Coefficient of thermal expansion -100.0 °C Coefficient of thermal expansion of 1.08E-5 1/K -
- 20.0 °C Coefficient of thermal expansion of 1.19E-5 1/K -
- 100.0 °C Coefficient of thermal expansion of 1.25E-5 1/K -
- 200.0 °C Coefficient of thermal expansion of 1.3E-5 1/K -
- 300.0 °C Coefficient of thermal expansion of 1.36E-5 1/K -
- 400.0 °C Coefficient of thermal expansion of 1.41E-5 1/K -
- 500.0 °C Coefficient of thermal expansion of 1.45E-5 1/K -
- 600.0 °C Coefficient of thermal expansion of 1.49E-5 1/K -
Max service temperature - Max service temperature of 500 °C Typical for Carbon Steel
Melting point - Melting point of 1480 - 1526 °C Typical for Low Carbon Steel
Specific heat capacity -100.0 °C Specific heat capacity of 423 J/(kg·K) -
- 20.0 °C Specific heat capacity of 461 J/(kg·K) -
- 100.0 °C Specific heat capacity of 479 J/(kg·K) -
- 200.0 °C Specific heat capacity of 499 J/(kg·K) -
- 300.0 °C Specific heat capacity of 517 J/(kg·K) -
- 400.0 °C Specific heat capacity of 536 J/(kg·K) -
- 500.0 °C Specific heat capacity of 558 J/(kg·K) -
- 600.0 °C Specific heat capacity of 587 J/(kg·K) -
Thermal conductivity 20.0 °C Thermal conductivity of 57.5 W/(m·K) -
- 100.0 °C Thermal conductivity of 55.7 W/(m·K) -
- 200.0 °C Thermal conductivity of 51.9 W/(m·K) -
- 300.0 °C Thermal conductivity of 47.6 W/(m·K) -
- 400.0 °C Thermal conductivity of 43.4 W/(m·K) -
- 500.0 °C Thermal conductivity of 39.6 W/(m·K) -
- 600.0 °C Thermal conductivity of 36 W/(m·K) -
Thermal diffusivity 20.0 °C Thermal diffusivity of 15.9 mm²/s -
- 100.0 °C Thermal diffusivity of 14.3 mm²/s -
- 200.0 °C Thermal diffusivity of 12.5 mm²/s -
- 300.0 °C Thermal diffusivity of 10.8 mm²/s -
- 400.0 °C Thermal diffusivity of 9.2 mm²/s -
- 500.0 °C Thermal diffusivity of 7.6 mm²/s -
- 600.0 °C Thermal diffusivity of 6.1 mm²/s -

DIN 17111 Grade U10S10 hot rolled chemical

Property Value
Carbon Carbon of 0.15 %
Manganese Manganese of 0.3 - 0.6 %
Phosphorus Phosphorus of 0.05 %
Sulfur Sulfur of 0.08 - 0.12 %

DIN 17111 Grade U10S10 hot rolled magnetic

Property Value Comment
Curie temperature Curie temperature of 770 °C Typical for Low Carbon Steel

DIN 17111 Grade U10S10 hot rolled electrical

Property Temperature Value
Electrical resistivity 20.0 °C Electrical resistivity of 1.1E-7 Ω·m
- 100.0 °C Electrical resistivity of 2.3E-7 Ω·m
- 200.0 °C Electrical resistivity of 3.04E-7 Ω·m
- 300.0 °C Electrical resistivity of 3.94E-7 Ω·m
- 400.0 °C Electrical resistivity of 5.01E-7 Ω·m
- 500.0 °C Electrical resistivity of 6.25E-7 Ω·m
- 600.0 °C Electrical resistivity of 7.7E-7 Ω·m

DIN 17111 Grade U10S10 hot rolled mechanical

Property Temperature Value Comment
Elastic modulus -100.0 °C Elastic modulus of 217 GPa -
- 20.0 °C Elastic modulus of 212 GPa -
- 100.0 °C Elastic modulus of 207 GPa -
- 200.0 °C Elastic modulus of 199 GPa -
- 300.0 °C Elastic modulus of 192 GPa -
- 400.0 °C Elastic modulus of 184 GPa -
- 500.0 °C Elastic modulus of 175 GPa -
- 600.0 °C Elastic modulus of 164 GPa -
Poisson's ratio 23.0 °C Poisson's ratio of 0.29 [-] Typical for Low Carbon Steel
Shear modulus 23.0 °C Shear modulus of 82 GPa Typical for Low Carbon Steel
Tensile strength 20.0 °C Tensile strength of 340 - 470 MPa -
Yield strength 20.0 °C Yield strength of 215 - 225 MPa -

Tailor-made to fit your specific requirements, our steel solutions deliver optimal results.

-- Our promise

Similar or equivalent steel materials

Get a quote

Post Categories