DILLIMAX 965 Extra Tough (EN 1.8934)
DILLIMAX 965 Extra Tough (EN 1.8934) introduction
DILLIMAX 965 is a high strength quenched and tempered, fine grained structural steel (through sufficient aluminium content.) with a minimum yield
strength of 960 MPa (140 ksi) in its delivery condition (referring to the lowest thickness range).
Equivalent material: EN S960QL1, DIN S960QL1, EN 1.8934, DIN 1.8934
DILLIMAX 965 Extra Tough (EN 1.8934) general
| Property |
Value |
Comment |
| Carbon equivalent (CET) |
Carbon equivalent (CET) of 0.43 [-] |
max. value according to DILLIMAX data sheet for thickness t ≤ 50 mm & 50 < t ≤ 125 mm |
| Carbon equivalent (CEV) |
Carbon equivalent (CEV) of 0.7 [-] |
max. value according to DILLIMAX data sheet for thickness t ≤ 50 mm & 50 < t ≤ 125 mm |
| - |
Carbon equivalent (CEV) of 0.82 [-] |
max. value for thickness t ≤ 50 mm according to EN 10025-6 |
| - |
Carbon equivalent (CEV) of 0.85 [-] |
max. value for thickness 50 < t ≤ 125 mm according to EN 10025-6 |
| Carbon equivalent note |
- |
DILLIMAX 965 Extra Tough (EN 1.8934) chemical
| Property |
Value |
Comment |
| Boron |
Boron of 0.004 % |
max. |
| Carbon |
Carbon of 0.2 % |
max. |
| Chromium |
Chromium of 0.9 % |
max. |
| Iron |
- |
| Manganese |
Manganese of 1.4 % |
max. |
| Molybdenum |
Molybdenum of 0.7 % |
max. |
| Nickel |
Nickel of 2 % |
max. |
| Niobium |
Niobium of 0.1 % |
max. V+Nb |
| Phosphorus |
Phosphorus of 0.018 % |
max. |
| Silicon |
Silicon of 0.5 % |
max. |
| Sulfur |
Sulfur of 0.005 % |
max. |
| Vanadium |
Vanadium of 0.1 % |
max. V+Nb |
DILLIMAX 965 Extra Tough (EN 1.8934) electrical
| Property |
- |
- |
| Application areas |
| Cold Forming |
Position of bending line to rolling direction |
Minimum bending radius |
Minimum die width |
| Transverse direction |
3 t |
9 t |
| Longitudinal direction |
4 t |
12 t |
DILLIMAX 965 Extra Tough (EN 1.8934) mechanical
| Property |
Temperature |
Value |
Testing Standard |
Comment |
| Charpy impact energy, V-notch |
-60 °C |
Charpy impact energy, V-notch of 27 J |
EN ISO 148-1 |
average of 3 tests according to EN 10025-6 | transverse specimens |
| - |
-60 °C |
Charpy impact energy, V-notch of 30 J |
EN ISO 148-1 |
average of 3 tests according to EN 10025-6 |
| Elongation |
- |
Elongation of 12 % |
EN ISO 6892-1 |
min. for plate thickness t ≤ 125 mm | transverse specimens, A5 |
| - |
- |
Elongation of 13 % |
ASTM A370 |
min. for plate thickness t ≤ 125 mm | transverse specimens, A2 |
| Tensile strength |
- |
Tensile strength of 850 - 1050 MPa |
EN ISO 6892-1 |
for plate thickness 100 < t ≤ 125 mm | transverse specimens |
| - |
- |
Tensile strength of 900 - 1100 MPa |
EN ISO 6892-1 |
for plate thickness 60 < t ≤ 100 mm | transverse specimens |
| - |
- |
Tensile strength of 950 - 1100 MPa |
EN ISO 6892-1 |
for plate thickness 50 < t ≤ 60 mm | transverse specimens |
| - |
- |
Tensile strength of 980 - 1150 MPa |
EN ISO 6892-1 |
for plate thickness t ≤ 50 mm | transverse specimens |
| Yield strength |
- |
Yield strength of 800 MPa |
EN ISO 6892-1 |
min. ReH for plate thickness 100 < t ≤ 125 mm | transverse specimens |
| - |
- |
Yield strength of 850 MPa |
EN ISO 6892-1 |
min. ReH for plate thickness 60 < t ≤ 100 mm | transverse specimens |
| - |
- |
Yield strength of 930 MPa |
EN ISO 6892-1 |
min. ReH for plate thickness 50 < t ≤ 60 mm | transverse specimens |
| - |
- |
Yield strength of 960 MPa |
EN ISO 6892-1 |
min. ReH for plate thickness t ≤ 50 mm | transverse specimens |
Explore limitless design possibilities with our versatile range of steel products.
-- Our promise
Get a quote