ASTM A600 Grade Type M7 Cold Drawn
Equivalent material: DIN 1.3348, DIN S 2-9-2, DIN HS2-9-2, AFNOR HS2-9-2, AFNOR 2-9-2, AFNOR Z100DCWV09-04-02-02, BS HS2-9-2, AISI M7, SAE M7, JIS SKH58, EN HS2-9-2, EN 1.3348, ISO HS2-9-2, GB/T T62942, GB/T W2Mo9Cr4V2, UNS T11307
ASTM A600 Grade Type M7 Cold Drawn general
| Property |
Temperature |
Value |
Comment |
| Density |
23.0 °C |
Density of 7.72 - 8 g/cm³ |
Typical for Tool And Machining Steel |
ASTM A600 Grade Type M7 Cold Drawn thermal
| Property |
Temperature |
Value |
Comment |
| Coefficient of thermal expansion |
23.0 °C |
Coefficient of thermal expansion of 1E-5 - 1.3E-5 1/K |
Typical for Tool And Machining Steel |
| Melting point |
- |
Melting point of 1370 - 1425 °C |
Typical for Tool And Machining Steel |
| Specific heat capacity |
23.0 °C |
Specific heat capacity of 420 - 460 J/(kg·K) |
Typical for Tool And Machining Steel |
| Thermal conductivity |
23.0 °C |
Thermal conductivity of 17 - 42 W/(m·K) |
Typical for Tool And Machining Steel |
ASTM A600 Grade Type M7 Cold Drawn chemical
| Property |
Value |
| Carbon |
Carbon of 0.97 - 1.05 % |
| Chromium |
Chromium of 3.5 - 4 % |
| Manganese |
Manganese of 0.15 - 0.4 % |
| Molybdenum |
Molybdenum of 8.2 - 9.2 % |
| Phosphorus |
Phosphorus of 0.03 % |
| Silicon |
Silicon of 0.2 - 0.55 % |
| Sulfur |
Sulfur of 0.03 % |
| Tungsten |
Tungsten of 1.4 - 2.1 % |
| Vanadium |
Vanadium of 1.75 - 2.25 % |
ASTM A600 Grade Type M7 Cold Drawn mechanical
| Property |
Temperature |
Value |
Comment |
| Elastic modulus |
23.0 °C |
Elastic modulus of 203 - 211 GPa |
Typical for Tool And Machining Steel |
| Hardness, Brinell |
23.0 °C |
Hardness, Brinell of 269 [-] |
- |
| Poisson's ratio |
23.0 °C |
Poisson's ratio of 0.3 [-] |
Typical for Tool And Machining Steel |
| Shear modulus |
23.0 °C |
Shear modulus of 79 GPa |
Typical for Tool And Machining Steel |
Get the best value for your money with our top-grade steel at competitive prices.
-- Our promise
Similar or equivalent steel materials
Get a quote