Amstrong® 320MC Laser
Amstrong® 320MC Laser introduction
The Amstrong® Laser sheet range comprises hot rolled steel grades developed for applications using computer-controlled thermal and mechanical cutting equipment (laser, plasma etc). The sheets are cut to length from ArcelorMittal coils for laser applications on certified lines that are able to reduce internal stresses and improve flatness before, during and after cutting.
All these grades are designed to:
Give improved productivity, quality and consistency with laser cutting
Meet the most stringent flatness requirements after cutting
Amstrong® Laser sheets are virtually free of internal stresses and can therefore be used to produce sheets with guaranteed flatness before, during and after cutting.
Equivalent material: EN S315MC
Amstrong® 320MC Laser general
| Property | Temperature | Value | Comment |
|---|---|---|---|
| Charpy impact energy | -20 °C | Charpy impact energy of 40 J | min. | for thickness 6-14 mm |
| Elongation | - | Elongation of 21 % | min. | for thickness 2-3 mm | Transverse, A80 |
| - | - | Elongation of 22 % | min. | for thickness 2-3 mm, A80 |
| - | - | Elongation of 26 % | min. A5.65√So | for thickness 2-14 mm | Transverse |
| - | - | Elongation of 27 % | min. A5.65√So | for thickness 2-14 mm |
| Tensile strength | - | Tensile strength of 420 - 500 MPa | for thickness 2-14 mm |
| - | - | Tensile strength of 435 - 540 MPa | for thickness 2-14 mm | Transverse |
| Yield strength | - | Yield strength of 320 - 420 MPa | for thickness 2-14 mm |
| - | - | Yield strength of 345 - 450 MPa | for thickness 2-14 mm | Transverse |
Amstrong® 320MC Laser mechanical
| Property | - | - | |||
|---|---|---|---|---|---|
| Application areas | |||||
| Delivery condtion | |||||
| Other | - | Laser Classic | Laser Premium | Side trimmed* | - |
| For sheets | Maximum deviation: the minimum value, depending on the circumstances, between 4 mm/m or 8 mm/2 m or 12 mm/3 m and the special tolerances in EN 10051:2010 | Maximum deviation: the minimum value, depending on the circumstances, between 3 mm/m or 6 mm/2 m or 9 mm/3 m and the special tolerances in EN 10051:2010 | Min width | Max width | |
| On cut parts | Maximum deviation of 5 mm over a length of 1 m | Maximum deviation of 3 mm over a length of 1 m | 595 | 1640 | |
We believe in building strong partnerships by providing top-grade steel solutions and exceptional service.
-- Our promise
Get a quote